Can’t connect to Linksys Extender? Here’s the Solution

This post has already been read 193 times!

Cannot connect to Linksys extender is one of the most common issues during Linksys Extender Setup. When a user tries to access Extender.linksys.com Support web page, an error screen pop up appears saying that you are not connected to the Linksys range extender physically and properly. If you are experiencing the same issue, then you have reached the right post. Without facing any difficulty, we will take you through the rose petal steps of configuration to connect Linksys extender.

Reasons why you connect to Linksys Extender

  1. Position of the Linksys Extender

The position of Linksys extender shouldn’t be optimal. You are supposed to place your range extender in a neat, clean, and open area. Also, it is not meant for placing nearby walls, doors, and windows. But you are free to place it nearby a wall socket so that you wouldn’t face any problem while plugging it in. However, a successful installation will make you free to move the range extender to its intended location.

Quick Note: Once completed, try again to access Linksys Smart WiFi Login page.

  1. Look for Interference Creating Obstructions

Well, there would be some objects in your office which creates loads of interference in the path of WiFi signals. Such obstructions or objects include floors, walls, doors, electronic appliances like microwave, electric iron, radio, refrigerator, toys, etc. On the other hand, metal gadgets or objects are also a big reason for signal interference. Similarly, reflexive surfaces such as fish tanks and mirrors also affect the WiFi signal strength.

Important Note: It is better to place your range extender out of the reach of such objects.

  1. Discontinuous Network Connection

Unplug your Linksys range extender and after 4-5 minutes plug it back again. This process is known as ‘rebooting’. After sometime wait for few minutes and let the extender boots up properly. There are also chances that you might get connected with someone else’s WiFi network. In order to check this, go to network icon in the taskbar and look for the network name. Once done, hit the connect button.

  1. Is your WiFi Coverage Up to the mark

Another reason why your Smart WiFi Setup Not Working would be that the WiFi coverage is not up to the mark or improper. To fix this problem, consider changing the antennas position of your Linksys range extender. Here, we would like to recommend that place the antennas of Linksys device in a straight vertical position.

If you are still unable to connect, then ask Support for Extender.linksys.com from our tech support team.

Note Down that to set up your Linksys range extender, the views shared in this post is least important.

Installation of a Linksys Range Extender

  1. Turn your Linksys extender on by plugging it into an electric outlet.
  2. After that, go to your computer and click the wireless icon.
  3. Look for Linksys Extender Setup network and connect with it.
  4. Open a web browser and in address bar type the default IP address of Linksys extender.
  5. Once you are on the setup page, just keep following the on-screen instructions.
  6. Change the language and accept the terms and condition.
  7. Click ‘Next’ and save the settings.
  8. After that, you are supposed to reboot your Linksys extender.

Now, unplug it for two minutes and after restarting place it anywhere.

Congrats! Your range extender has been configured successfully.

For any assistance, help or support, you are free to drop feedback, question, and queries in the comment box appearing below.

You may also like...

Add a Comment

Your email address will not be published. Required fields are marked *